The Original stainless steel corrugated water connector... Since 1981
 

Flexible Stainless Steel Corrugated Water Connectors

Water Dealer Specifications: Parts, Connectors: Hague, Culligan and Erie bypasses

Often imitated, never equaled!

Corrugated Stainless Steel Flexible
Water Purification / Softener Connectors for Hague Quality Water
Specification Sheet

We recommend the use of Dow 111 or similar, non-toxic silicone based lubricant on washers for all installations.

Caution: When connecting to a copper male adaptor or brass nipple, make sure to file any sharp edges which may contact and damage washer causing leaks.

Note: Manufacturer assumes no responsibility for failure due to improper installation.

SPECIFICATION: COMPLIANCES/LISTINGS:

Furnish and install Corrugated Stainless Steel Full Port Water Softener Connectors

ICC-ES PMG

ICC Listed, Tested & Certified

UPC, IPC, IMC, IRC USA

Low Lead Compliant CA Health & Safety Code 116875

ASME A112.18.6/CSA B125.6-2009 compliant

NSF-61 (ICC-ES PMG Certified to ANSI/NSF sec 9)

Additional listings: State of Wisconsin, Commonwealth of Massachusetts, City of Los Angeles

 

  • DESIGN FEATURES: Mega-flow SUPER Water-flexTM
  • 304 Series Stainless Steel
  • No reduction necessary for easiest installation
  • Flows 135% more than braided type
  • Maintains optimum flow - no restriction
  • Operate appliance at maximum efficiency
  • Kink and Crimp Free
  • Chrome plated brass nuts
  • DuPont Zytel Nylon nuts  NSF listed
  • Extremely Flexible
  • Will not corrode or rust
  • No Dielectric union required
  • Highest Quality EPDM washer
  • Resists work hardening
  • Working pressure 200 psi
  • Burst pressure 1800+ psi
  • 100% Leak Tested
  • No Sweat Installation
  • Lifetime Guarantee
  • Temperature rating 40 - 250 degrees F
  • Custom Design - Installs Direct from Appliance to Supply line
Model # Description Length
SWCN1141 *1 1/4" nylon FIP x 1" FIP
1" tube with Hague 1 1/4" FIP x 1" FIP
12", 15", 18", 24"
SWCN11434 *1 1/4" nylon FIP x 3/4" FIP
3/4" tube with Hague 1 1/4" FIP x 3/4" FIP
15", 18", 24"
SWC-114 * 1 1/4" brass FIP x 1 1/4" brass FIP
1 1/4" tube with Hague 1 1/4" FIP x 1 1/4" FIP
18", 24"

*Special Hague 1 1/4 FIP nut is 6mm longer to correctly fit the Hague Water max bypass.

Designed and manufactured specifically to save time & money on the installation without reducing the flow!

Product Submittal

Job Name:

Date:___________________

Model#__________________ Quantity:_________

Architect/Contractor:_____________________________________