The Original stainless steel corrugated water connector... Since 1981

Flexible Stainless Steel Corrugated Water Connectors

Water Dealer Specifications: Parts, Connectors: Culligan, Hague and Erie bypasses

Often imitated, never equaled!

Corrugated Stainless Steel Flexible
Water Purification / Softener Connectors for Culligan Water, Hague and Erie
Specification Sheet


We recommend the use of Dow 111 or similar, non-toxic silicone based lubricant on washers for all installations.

Caution: When connecting to a copper male adaptor or brass nipple, make sure to file any sharp edges which may contact and damage washer causing leaks.


Note: Manufacturer assumes no responsibility for failure due to improper installation.


We at Culligan water are extremely happy with the service we have received from Falcon Stainless. They have gone out of their way to insure we have the highest quality product.

The price is at substantial savings compared to the competition. I would recommend Falcon Stainless to anyone out there who is in need of quality product, from a top notch company.

John B
Culligan Water

[see all testimonials]

Furnish and install Corrugated Stainless Steel Full Port Water Softener Connectors


ICC Listed, Tested & Certified


Low Lead Compliant CA Health & Safety Code 116875

ASME A112.18.6/CSA B125.6-2009 compliant

NSF-61 (ICC-ES PMG Certified to ANSI/NSF sec 9)

Additional listings: State of Wisconsin, Commonwealth of Massachusetts, City of Los Angeles


  • DESIGN FEATURES: Mega-flow SUPER Water-flexTM
  • 304 Series Stainless Steel
  • No reduction necessary for easiest installation
  • **Flows approx 135% more than braided type
  • Maintains optimum flow - no restriction
  • Operate appliance at maximum efficiency
  • Kink and Crimp Free
  • Chrome plated brass nuts
  • DuPont Zytel Nylon nut  NSF listed
  • Extremely Flexible
  • Will not corrode or rust
  • No Dielectric union required
  • Highest Quality EPDM washer
  • Resists work hardening
  • Working pressure 200 psi
  • Burst pressure 1800+ psi
  • 100% Leak Tested
  • No Sweat Installation
  • Lifetime Guarantee
  • Temperature rating 40 - 250 degrees F
  • Custom Design - Installs Direct from Appliance to Supply line


 ** based on straight tube mathematical calculations at 60psi and 17.57 fps water velocity

Model # Description Length
SWCN11434 1 - 1/4" Nylon FIP x 3/4" brass FIP 15", 18", 24"
SWCN1141" 1 - 1/4" Nylon FIP x 1" brass FIP 12", 15", 18", 24"
SWC-114 1 - 1/4" brass FIP x 1 1/4" brass FIP 18", 24"

Designed and manufactured specifically to save time & money on the installation without reducing the flow!

Product Submittal

Job Name:


Model#__________________ Quantity:_________